With Paessler SNMP Tester you can run simple SNMP requests against a device in your network. During the test each single step of the SNMP request is logged into a logfile for analysis. The idea of this free program is to debug SNMP requests down to the protocol level in order to find communication and/or data problems in SNMP monitoring configurations.Just follow these simple instructions: • Download Paessler SNMP Tester and run the snmptest.exe file. • Enter the IP address of your device and select the SNMP port and the SNMP community string. • Select a request type: • MIB2 Interface: Reads the traffic counter of a port according to the MIB2 OID • Custom OID: Enter a custom OID value to access any OID value on the device • Device Uptime: Reads the standard system uptime value from the device • It may be necessary to select a specific local IP for the SNMP request (usually only necessary for multi homed systems) • Click on "Run Test" to start the testing process. • During the test you will find detailed information in the logfile window.