Скачать драйвер для LG GGW-H10N Blu-Ray Drive Firmware 1.04

Update Instructions:

- If you haven't already, download the firmware file and extract the zip file.
- Connect the drive to the secondary IDE channel as a master drive with no other devices connected to that channel (Ignore if it's an SATA drive). Start Windows and verify it can recognize the drive.
- Close all other programs including: screen saver, and /or antivirus. Do not open any programs or start any system functions during the update as they can interfere with data transfer and damage the drive.
- Open the firmware program.
- Click the update button and do not touch or interfere with the drive while the firmware is being upgraded. IMPORTANT - DO NOT INTERFERE WITH THE DRIVE DURING THIS PROCESS. If an error occurs during the upgrade process, or the upgrade process is canceled during this process, damage to the drive can occur.
- When the upgrade is complete the screen should say FIRMWARE UPDATE SUCCESSFUL. Re-boot your PC.


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.