BIOS 1.06 Updates: - Improved Memory Compatibility - Improved XMP Support - Adds support for Intel Pentium G3258 Overclocking - Improved CPU P-State Functionality - Added CPU Voltage Ring Ratio for Intel G3258 CPU - Fix USB Halt Error Windows Installation: - Download the correct .zip for your motherboard - First go into your BIOS and load defaults, save and exit - Close all open programs. - Go into the folder where you unzipped this package and update.bat - Press Y to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup. - NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version. BIOS Installation: - Extract the contents of .zip file to USB flash drive (must be formatted as FAT32) - Reboot the machine and go into the system BIOS - From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File." - Select the .bin file you wish to flash. - After the flashing is finished, shut the system down completely. Then power on again. - After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Скачать