Fixes: - Fix USB keyboard hang while in BIOS menu - Fix popup boot menu cannot use ESC key - Fix target memory calculation error when BCLK is 131.25 and memory set to 2133MHz - Fix plug 2 graphics cards in and set X16 will cause no display - Fix GUI CPU frequency caculation - Fix IOH PCI-E slot name - Fix mouse performance issue while in BIOS - Allow third memory timing input to be set zero - Fix non XMP DIMM can get SPD timing - Fix non XMP DIMM showing incorrect target frequency - Fix some USB devices causing a long beep Windows Installation: - Download the correct .zip file for your motherboard: - First go into your BIOS and load defaults, save and exit - Close all open programs. - Go into the folder where you unzipped this package and update.bat - Press Y to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup. USB Flash/DOS Drive Installation: - Create a bootable disk. - Extract the above .zip file to your bootable disk. - From a DOS prompt, run update.bat - Press Y to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, shut the system down completely. Then power on again, and verify that the correct version was applied by checking the version number on the lower right corner of the BIOS screen.
Скачать