New and Modified Features: System: - S.M.A.R.T. information for internal TeraStation drives is now supported. To check S.M.A.R.T. information, navigate to 'Drives' - 'Drives' and click 'S.M.A.R.T.'. - The BIOS version is now displayed in the system information section in the upper-right corner of Settings. - Timer settings have been modified for clarity. For example, "Every day" is now "Daily" and "27:00" is now "Next day 3:00 am". - The daily email report now contains MAC addresses. Network: - Network interfaces are now selectable for DNS and gateway devices. To change the settings, navigate to 'Network' - 'IP Address' and click 'Change'. Replication: - Compression and encryption of data transfers is now supported. To use these options, navigate to 'Backup' - 'Replication', click 'Edit', and select the desired options. Failover: - Added notification if user tries to use a reserved IP address (such as 127.0.0.1 and multicast addresses) as the service IP address. UPS: - UPS sync now works with TS7000 1.x series firmware and other TeraStation series such as TS3000 and TS5000. Windows Network: - Removed the "Use Windows domain controller as authentication server" option from the external authentication settings. This option can continue to work if it's already configured before updating to the 2.30 firmware. NFS: - Now supports read-only folders. - Async is now available when the device is in kernel mode. After updating the firmware, the default setting is "Async". To change it to "Sync", go to 'File Sharing' - 'NFS', select the 'NFS Rules' tab, and click 'Add Rule'. - Improved compatibility with NFS clients. iSCSI: - IQN is now displayed in the volume settings. IQN for each iSCSI volume is in 'Drives' - 'iSCSI'. - The default setting is now "Asynchronous". To change it to "Synchronous", go to "Advanced Settings" while creating a volume. Backup: - Modified to run backup jobs immediately if the schedule is set to "Immediately". - Updated rsync and improved the reliability of backup operations. Other: - WebAccess Remote and Amazon S3 are now available simultaneously. However, using the same shared target folder is required. Subfolders will be created for each function in the shared folder. - Squeezebox server has been removed. Bug Fixes: Failover: - Fixed a bug where the user could access Settings while updating the firmware. - Fixed a bug where initializing failover failed if iSCSI was enabled on the backup TeraStation. - Fixed a bug where failover couldn't start because failover settings did not initialize properly. - Fixed a bug where files were not synchronized correctly after recovering from maintenance mode in failover. System: - Fixed bug where services could not restart while formatting a read-only USB drive. - Fixed a bug where 'Convert to External User' in 'File Sharing' - 'Users' was grayed out when external authentication was enabled. - Fixed a bug where a hostname could not contain hyphens (-). - Fixed a bug where more than 16 single-byte characters could be entered for a hostname. - Fixed a bug where the I25 message was not displayed when a USB drive check was run. - Fixed a bug where SSL certification could not update correctly. - Fixed a bug where access restrictions were not applied for WebAccess immediately. - Fixed a bug where "I'm here" didn't work from NAS Navigator2. - Added better support for importing users from a CSV file. Users: - Users added by CSV are now added to the correct hdusers group. Network: - Fixed the bug where default gateway settings didn't work properly when a static IP address was configured after a firmware update. - Fixed a bug where TeraSearch didn't work properly after changing port settings. - Fixed a bug where the IP address was not displayed properly when port trunking was enabled and a 10 Gb Ethernet interface was added. - Fixed a bug where usernames and group names with multibyte characters in their name didn't work properly in an Active Directory environment. - Fixed a bug where the "Open Download Manager" button didn't work when the port number for BitTorrent had been changed. FTP: - Fixed a bug where the FTP server could potentially serve shares that were not selected for FTP sharing. RAID: - Fixed a bug where deleting a RAID array failed if LVM was enabled. - Fixed a bug where RAID scanning didn't work on the first day of each month. - Fixed a bug where a RAID array couldn't be built from Internet Explorer 10 with more than 9 drives. - Replication: - Fixed a bug where files in the replication source folder were not backed up if the folder name contained a space. - Fixed a bug where failover file copying stopped if more than 6,000 files were added to the replication source TeraStation. - Fixed a bug where replication didn't work after a file copy continued for a long time. UPS: - Fixed a bug where E10 was displayed incorrectly when an APC UPS went into test mode. Windows Network: - Fixed a bug where the hidden share attribute wasn't preserved after restarting the TeraStation. - Fixed a bug where the trashbox name was sometimes displayed as ".recycle" instead of "trashbox". NFS: - Fixed a bug where NFS could be configured redundantly. iSCSI: - Fixed a bug where the target volume couldn't be detected from an iSCSI initiator if iSCSI access restrictions were enabled. DLNA: - Fixed a bug where private folder could be detected from DLNA client. Backup: - Fixed a bug where I255 was displayed instead of I54 when backup failed. - Fixed a bug where backup password was unintentionally configured after the system restarted and the backup or replication target was not found. - Fixed a bug where files were not backed up to the Amazon S3 target folder. Other: - Fixed a bug where an error message didn't show properly when configuring WebAccess Remote. - Fixed a bug where restarting the WebAccess Remote and Amazon S3 services failed when accessing their mutual shared folder from Explorer. - Fixed a bug where UPnP didn't configure the router for WebAccess. - Fixed a bug where undeletable files were generated when copying the files by php scripts with web server enabled. - Fixed a bug where the php.ini file could not be edited 'Services' - 'Web Server'. - Fixed a bug where a blank email was sometimes sent. How to Update: - Connect the TeraStation to the computer that will run the updater, and make sure both devices are on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different. - Exit all applications. Also, disable or exit any firewall software. You may resume firewall after the update is complete. - Extract the downloaded file and run TSUpdater.exe. When a TeraStation is detected, an update window will open. - If multiple TeraStation units are connected, select which unit to update. - Click 'Update' and enter the TeraStation's admin password. - Click 'OK'. - The firmware will begin updating. The info LED will flash during the update process. - When update is complete, a message will appear. Notes: - Do not turn the unit or the hub off until the update is finished. - The update will take several minutes. If it times out after 10 minutes or more, reboot the TeraStation and try again. - Do not access your TeraStation while updating firmware. - If the firmware update fails due to inconsistent wireless connectivity, connect your PC via a wired connection, then try again. - Update may fail if the computer updating the firmware has multiple network interfaces enabled. Disable any unnecessary network interfaces and try again. - USB drives are not mounted automatically after a firmware update. Unplug and then reconnect them after the update.
Скачать