Fixes: - Improve USB 3.0 compatibility - Improve VCore stability over 1.4V - Fix "load previous values" function - Fix memory TWR value setting - Improve PCI-E compatibility - Fix system cannot boot when setting manual CPU core Windows Installation: - Download the .zip file for your motherboard - Close all open programs - Go into the folder where you unzipped this package and run Windows_Update.bat - Press any key to continue - Click YES when the User Account Control message appears - Press Y in to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, the system will automatically shut down after a key is pressed. Then power on again and go into BIOS to setup. USB Flash/DOS Drive Installation: - Create a bootable disk. - Extract the above .zip file to your bootable disk. - From a DOS prompt, run DOS_Update.bat - Press Y in to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, shut the system down completely. Then power on again. Important: - After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Скачать