Installation notes: - Right click on the downloaded file and select Extract All or Extract Here option. Make sure to remember the location where the extracted file is saved will be saved. - Log into the TEW-735AP by typing http://tew-735ap or the IP address. The default IP address of TEW-735AP is 192.168.10.100 - Click on Management and then Firmware Upgrade - Click Browse... and navigate to the folder on your computer in which the unzipped firmware file (.bin) is. - Located and select it the firmware file. - Click Apply. - Wait until the firmware upload completed and the device reboot. - The firmware upgrade is completed. - Reset to Factory Default Settings Note: Not all the configuration files can be carried over to different versions of firmwares. It is recommended that you reset configurations to factory default and configure you TEW-735AP from the fresh start again. To reset TEW-735AP configuration back to factory default, click Reset in this page. All configurations will be set back to its original default settings.
Скачать