Specifications: - APU FM2+ Socket: AMD A series processors AMD Athlon series processors - Chipset AMD A88X - Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory Dual channel memory architecture Support for DDR3 2133/1866/1600/1333 MHz memory modules Support for AMD Memory Profile (AMP)/Extreme Memory Profile (XMP) memory modules - Onboard Graphics APU with integrated AMD Radeon HD 8000/7000 series graphics: To use the onboard graphics port, you must install an AMD APU with integrated graphics. 1 x D-Sub port, supporting a maximum resolution of 1920x1200 1 x DVI-D port, supporting a maximum resolution of 2560x1600 Support for 2560x1600 resolution requires both a monitor and cable that support Dual Link DVI. The DVI-D port does not support D-Sub connection by adapter. 1 x HDMI port, supporting a maximum resolution of 4096x2160 The resolution of 4096x2160 can be supported when using an FM2+ APU; the maximum resolution supported is 1920x1200 when using an FM2 APU. Support for HDMI 1.4a version. Maximum shared memory of 2 GB - Audio Realtek ALC898 codec High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out - LAN Realtek GbE LAN chip (10/100/1000 Mbit) - Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) (The PCIEX16 slot conforms to PCI Express 3.0 standard.) To support PCI Express 3.0, you must install an FM2+ APU. 1 x PCI Express x16 slot, running at x4 (PCIEX4) 3 x PCI Express x1 slots (The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.) 2 x PCI slots - Multi-Graphics Technology Support for AMD Dual Graphics technology Only A series APUs support AMD Dual Graphics. - Storage Interface Chipset: 8 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD - USB Chipset: 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) 9 USB 2.0/1.1 ports (5 ports on the back panel, 4 ports available through the internal USB headers) - Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 8 x SATA 6Gb/s connectors 1 x APU fan header 3 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x Clear CMOS jumper 1 x Trusted Platform Module (TPM) header 2 x gain control switches - Back Panel Connectors 1 x PS/2 keyboard/mouse port 1 x D-Sub port 1 x DVI-D port 1 x HDMI port 2 x USB 3.0/2.0 ports 5 x USB 2.0/1.1 ports 1 x RJ-45 port 1 x optical S/PDIF Out connector 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) - I/O Controller iTE I/O Controller Chip - H/W Monitoring System voltage detection APU/System temperature detection APU/System fan speed detection APU overheating warning APU/System fan fail warning APU/System fan speed control - BIOS 2 x 64 Mbit flash Use of licensed AMI EFI BIOS Support for DualBIOS PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Скачать