Fixes: - Significant overclocking improvement when using Ivy Bridge-E processors - Update product name to proper part number - Fix PE4 LEd blinking - Update MCU to 306 - Fix vcore error when voltage is below 1.535V Windows Installation: - Close all open programs - Go into the folder where you unzipped this package and run UPDATE.bat - Press any key to continue - Click YES when the User Account Control message appears - Press Y in to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, the system will automatically shut down after a key is pressed. Then power on again and go into BIOS to setup. USB Flash/DOS Drive Installation: - Create a bootable disk. - Extract the above .zip file to your bootable disk. - From a DOS prompt, run UPDATE.bat - Press Y in to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, shut the system down completely. Then power on again. After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Скачать