Specifications: - CPU Support for Intel Core i7 processors in the LGA2011 package L3 cache varies with CPU - Chipset Intel C606 Express Chipset - Memory 8 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory 4 channel memory architecture Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules Support for unbuffered ECC memory modules Support for Extreme Memory Profile (XMP) memory modules - Audio Realtek ALC898 codec High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out - LAN 1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN1) 1 x Realtek GbE LAN chip (10/100/1000 Mbit) (LAN2) - Wireless Communication module Wi-Fi 802.11 a/b/g/n, Supports 2.4/5 GHz Dual-Band Bluetooth 4.0, 3.0+HS, 2.1+EDR - Expansion Slots 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. 1 x PCI Express x16 slot, running at x8 (PCIEX8) The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode. 1 x PCI Express x16 slot, running at x4 (PCIEX4) (The PCIEX16, PCIEX8, and PCIEX4 slots conform to PCI Express 3.0 standard.) 1 x PCI Express x1 slot (The PCIEX1 slot conforms to PCI Express 2.0 standard.) 1 x PCI slot - Multi-Graphics Technology Support for 3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology - Storage Interface Chipset: 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices Support for RAID 0, RAID 1, RAID 5, and RAID 10 When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 8 x SAS 3Gb/s connectors (SAS2 0~7) supporting up to 8 SAS 3Gb/s devices The SAS connectors do not support optical drives. Support for RAID 0, RAID 1, and RAID 10 Marvell 88SE9172 chip: 2 x eSATA 6Gb/s connectors (including 1 eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices Support for RAID 0 and RAID 1 - USB Chipset: Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, including 1 eSATA/USB Combo, 6 ports available through the internal USB headers) VIA VL800 chip: Up to 4 USB 3.0/2.0 ports on the back panel Due to a Windows 7 limitation, please connect your USB device(s) to the USB 2.0/1.1 port(s) before the VIA USB 3.0 controller driver is installed. Fresco FL1009 chip: Up to 2 USB 3.0/2.0 ports (available through the internal USB header) - IEEE 1394 VIA VT6308 chip: Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header) - Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 8 x SAS 3Gb/s connectors 1 x CPU fan header 4 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 3 x USB 2.0/1.1 headers 1 x IEEE 1394a port 1 x Clear CMOS jumper 1 x Trusted Platform Module (TPM) header 1 x power button 1 x reset button - Back Panel Connectors 1 x PS/2 keyboard/mouse port 1 x CPU overclocking button 1 x BIOS switch button 1 x Clear CMOS button 1 x IEEE 1394a port 4 x USB 3.0/2.0 ports 5 x USB 2.0/1.1 ports 1 x eSATA/USB Combo connector 1 x eSATA 6Gb/s connector 2 x RJ-45 ports 1 x optical S/PDIF Out connector 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) - I/O Controller iTE I/O Controller Chip - H/W Monitoring System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU overheating warning CPU/System fan fail warning CPU/System fan speed control Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. - BIOS 2 x 64 Mbit flash Use of licensed AMI EFI BIOS Support for DualBIOS PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Скачать