This download contains an improved version of the firmware found on your Creative ZEN. It improves your player's speed of reading a memory card. For more details, read the rest of this web release note. Added Features or Enhancements: * Improves your player's speed of reading a memory card. Fixes: * Displays the correct battery status after the player is charged with a power adapter. Requirements: * Microsoft Windows Vista, Windows XP (Service Pack 2) * Windows Media Player 10 or later * USB port * Creative ZEN Notes: * To install this firmware 1. Download the ZEN_PCFW_L22_1_11_04e.exe file into your local hard disk. 2. Close all application windows that are currently running on your computer. 3. Connect your player to your computer. 4. Double-click the downloaded file and follow the instructions on the screen. * If your player fails to restart after the firmware upgrade: 1. Turn off your player. 2. Disconnect your player from your computer. 3. Press and hold the Play/Pause button. Continue to hold the button while you perform steps 4 and 5. If you accidentally release the button, start the procedure again. 4. Gently push a straightened paper clip into the Reset hole. 5. Slide the On/Off switch towards the USB port and hold until the display lights up. The Recovery Mode screen appears with four options: Clean Up, Format All, Reload Firmware, and Reboot. 6. Select Reload Firmware, followed by Yes. 7. Connect your player to your computer. 8. Double-click the downloaded file and follow the instructions on the screen.
Скачать