Silicon Image Model: SIL-3x12 Bios SATA PCI Version 4.2.1.0 To flash the SATA BIOS: (Note: Please disconnect all the hard disks and SATA devices from SATA controller before updating the BIOS) 1. Decompress the BIOS and flash utility onto a floppy disk. 2. Boot the computer with a DOS boot disk. 3. Place the floppy with the BIOS and flash utility into the floppy drive. 4. At the command line type: "updflash b4210.bin", then press Enter. 5. It may take 2-5 minutes to upload and verify the BIOS 6. Reboot the system after flashing is complete and check the BIOS.
Скачать