Specifications Microprocessor Microprocessor types Select Intel® Core™ (dual core) processors Intel® Pentium® 4 (single core) (with Hyper-Threading technology) Intel® Pentium® D (dual core) (no Hyper-Threading technology) Select Intel® Pentium® Extreme Edition processors (single or dual core) (with Hyper-Threading technology) Cache 2MB or 4MB (depending on your configuration) Memory Type 533-MHz and 667-MHz ECC and non-ECC DDR2 SDRAM NOTE: Ensure that you do not mix ECC and non-ECC memory. NOTE: Your computer does not support registered or buffered memory. Memory connectors four Memory capacities 512 MB, 1 GB, or 2 GB Minimum memory 1 GB Maximum memory 8 GB BIOS address F0000h Computer Information Chipset Intel 975X Data bus width 64 bits Address bus width 32 bits DMA channels eight Interrupt levels 24 BIOS chip (NVRAM) 8 Mb Memory speed 533/667MHz NIC Integrated network interface with ASF 2.0 support as defined by DMTF Capable of 10/100/1000-Mbps communication: * Green — A good connection exists between a 10-Mbps network and the computer. * Orange — A good connection exists between a 100-Mbps network and the computer. * Yellow — A good connection exists between a 1000-Mbps (1-Gb) network and the computer. * Off — The computer is not detecting a physical connection to the network. SAS controller add-in SAS 5iR card System clock 800-MHz or 1066-MHz data rate (depending on your processor) Video Type PCI Express x16 up to 150 W Audio Type internal stereo: integrated HD audio or PCI option cards Stereo conversion 24-bit analog-to-digital; 24-bit digital-to-analog Controllers Hard drive integrated serial ATA (4), with RAID 0/1/5/10 and command queuing integrated ATA-100 (1 channel) Expansion Bus Bus type three PCI 2.2 one PCI Express x16 up to 150 W one PCI Express x8, wired as x4 one PCI Express x1 eight USB 2.0 (2 front, 5 back, 1 internal) Bus speed PCI: 33 MHz PCI Express: x1 slot bidirectional speed - 500 MB/s x 4 slot bidirectional speed - 2 GB/s x16 slot bidirectional speed - 8 GB/s Card slots The upper five connector slots support full-length cards, and the connector slot at the bottom supports a half-length card. NOTE: Check the documentation for cards to ensure that you can accommodate them in your configuration. Some cards that require more physical space and power (such as PCI Express graphics cards) may restrict the use of other cards. PCI: connectors three connector size 120 pins connector data width (maximum) 32 bits PCI Express: connectors one x1 connector size 36 pins connector data width (maximum) 1 PCI Express lane PCI Express: connectors one x4 full-length slot (supports x8, x4, and x1) connector size 98 pins connector data width (maximum) 4 PCI Express lanes PCI Express: connectors one x16 slot (supports x16 and x1 modes/cards; x8 and x4 modes/cards are not supported) connector size 164 pins connector data width (maximum) 16 PCI Express lanes Drives Externally accessible: one 3.5-inch drive bay (FlexBay) in desktop orientation, or two 3.5-inch drive bays (FlexBay) in tower orientation two 5.25-inch bays Available devices serial ATA drive, SAS drive, floppy drive, Media Card Reader, USB memory devices, CD drive, CD-RW drive, DVD drive, DVD+RW drive, and DVD and CD-RW combo drive Internally accessible: two 3.5-inch hard drive bays Connectors External connectors: Serial one 9-pin connector (optional 2nd connector); 16550C-compatible Parallel one 25-hole connector (bidirectional) IEEE 1394a one front-panel 6-pin serial connector (with optional card) Video VGA or DVI connector on graphic card Network adapter RJ45 connector PS/2 (keyboard and mouse) two 6-pin mini-DIN USB two front-panel, one internal, and five back-panel USB 2.0–compliant connectors Audio two rear connectors for line-in and line-out; two front-panel connectors for headphones and microphone System board connectors: Primary IDE drive 40-pin connector on PCI local bus Serial ATA (4) 7-pin connector
Скачать