CPU - Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package - L3 cache varies with CPU Chipset - Intel Z77 Express Chipset Memory - 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. - Dual channel memory architecture - Support for DDR3 1600/1333/1066 MHz memory modules - Support for non-ECC memory modules - Support for Extreme Memory Profile (XMP) memory modules Onboard Graphics Integrated Graphics Processor: - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a maximum resolution of 1920x1200 - 1 x DisplayPort, supporting a maximum resolution of 2560x1600 Audio - Realtek ALC898 codec - High Definition Audio - 2/4/5.1/7.1-channel - Support for S/PDIF In - Support for S/PDIF Out LAN - 1 x Atheros GbE LAN chip (10/100/1000 Mbit) (LAN1) - 1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN2) Expansion Slots - 3 x PCI Express x16 slots, running at x16 (PCIEX16_1~3) * For optimum performance, if only one expansion card is to be installed, be sure to install it in the PCIEX16_2 slot. - 2 x PCI Express x16 slots, running at x8 (PCIEX8_1~2) * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_3. The PCIEX16_1/PCIEX16_3 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated. (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.) * Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility. * The PCIEX16_2 slot will become unavailable when an expansion card is installed in the orange PCI Express x16 slot. - 2 x PCI Express x1 slots (All PCI Express x1 slots conform to PCI Express 2.0 standard.) Multi-Graphics Technology - Support for 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology Storage Interface Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 2 x Marvell 88SE9172 chips: - 4 x SATA 6Gb/s connectors (GSATA3 6~9) supporting up to 4 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) - Up to 4 USB 2.0/1.1 ports (available through the internal USB headers) VIA VL800 chip: - Up to 4 USB 3.0/2.0 ports on the back panel * Due to a Windows 7 limitation, please connect your USB device(s) to the Intel controlled USB port(s) (located below the PS/2 keyboard/mouse port) before the VIA USB 3.0 controller driver is installed. Etron EJ168 chip: - Up to 2 USB 3.0/2.0 ports (available through the internal USB header) Internal I/O Connectors - 1 x 24-pin ATX main power connector - 2 x 8-pin ATX 12V power connectors - 1 x PCIe power connector - 6 x SATA 6Gb/s connectors - 4 x SATA 3Gb/s connectors - 1 x mSATA connector - 1 x CPU fan header - 6 x system fan headers - 1 x front panel header - 1 x front panel audio header - 1 x S/PDIF Out header - 1 x S/PDIF In header - 2 x USB 3.0/2.0 headers - 2 x USB 2.0/1.1 headers - 1 x serial port header - 1 x Clear CMOS jumper - 1 x power button - 1 x reset button - 1 x Clear CMOS button - 1 x Gear button - 1 x CPU BCLK Down button - 1 x CPU BCLK Up button - 1 x CPU Ratio Down button - 1 x CPU Ratio Up button - 1 x onboard voltage measurement module - 2 x BIOS switchs - 1 x LN2 switch Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x D-Sub port - 1 x DVI-D port - 1 x optical S/PDIF Out connector - 1 x HDMI port - 1 x DisplayPort - 6 x USB 3.0/2.0 ports - 2 x RJ-45 ports - 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Install - Support for Xpress Recovery2 - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. - Support for eXtreme Hard Drive (X.H.D) - Support for Auto Green - Support for ON/OFF Charge - Support for Q-Share - Support for 3D Power - Support for EZ Setup Bundle Software - Norton Internet Security (OEM version) - Intel Rapid Start Technology - Intel Smart Connect Technology - Intel Smart Response Technology - LucidLogix Virtu MVP * Make sure the monitor cable has been connected to the integrated graphics port on the back panel. Operating System - Support for Microsoft Windows 8/7/XP Form Factor - E-ATX Form Factor; 30.5cm x 26.4cm Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Скачать