1.update CPU uCode to support E version CPU 2.add IPMI function 3.add AIC8140 RAID function Specifications: Processor Supports two Intel Xeon processors over an 800 MHz system bus 1 MB L2 up to 3.60 GHz Hyper-Threading technology Intel Extended Memory 64 Technology Demand Based Switching with Enhanced Intel SpeedStep Technology Streaming SIMD Extensions 3 (SSE3) Chipset Intel 7520 Memory Controller Hub (MCH) Intel 82801EB I/O Controller Hub 5 (ICH5) Intel 6700PXH 64-bit PCI Hub System memory Supports dual channel DDR333 memory module 8 DIMMs support up to 16GB Supports Registered with ECC memory modules Supports 128MB/256MB/512MB/1GB/2GB memory modules Graphics ATi RageXL video controller with 8MB on board LAN Dual Broadcom BCM5721 NetXtreme Gigabit Ethernet Controller Server Management Support IPMI 1.5 Support mBMC USB Two(2) USB 2.0 ports at the rear panel Three internal connectors for six front panel USB 2.0 ports On board IDE Two channel Ultra 100/66/33 ATA Support ATAPI IDE CD-ROM, ZIP-100 & LS-120 On board SATA Adaptec AIC8140 SATA controller on board Eight SATA II ports Support Adaptec Host RAID 0, 1, 10 Two SATA ports by ICH5 Expansion Slot Two PCI Express x8 (one with x4 bandwidth) One PCI-X 64/133 Two PCI-X 64/100 PCI 2.3 Compliant PCI-X 1.0 specification compliant Rear Panel I/O PS/2 mouse and keyboard connector 1 x VGA port 1 x 9-pin 16550-based serial port 2 x USB 2.0 ports 2 x RJ-45 Ports System BIOS AMI BIOS Flash write protection for BIOS and one jumper Support ACPI S1 From Factor E-ATX Form Factor 12" x 13" SSI EEB 3.5 Compliant EPS 12V Power Supply
Скачать