CPU - Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package - L3 cache varies with CPU Chipset - Intel Z77 Express Chipset Memory - 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. - Dual channel memory architecture - Support for DDR3 2666(OC)/1600/1333/1066 MHz memory modules - Support for non-ECC memory modules - Support for Extreme Memory Profile (XMP) memory modules Onboard Graphics Chipset: - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a maximum resolution of 1920x1200 - 1 x DisplayPort, supporting a maximum resolution of 2560x1600 Audio - VIA VT2021 codec - High Definition Audio - 2/4/5.1/7.1-channel - Support for S/PDIF Out LAN - Atheros GbE LAN chip (10/100/1000 Mbit) Expansion Slots - 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. - 1 x PCI Express x16 slot, running at x8 (PCIEX8) (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.) * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode. * The PCI Express x16 slots support up to PCI Express 2.0 standard when an Intel 32nm (Sandy Bridge) CPU is installed. - 1 x PCI Express x16 slot, running at x4 (PCIEX4) * The PCIEX4 slot shares bandwidth with all PCI Express x1 slots. All PCI Express x1 slots will become unavailable when a PCIe x4 expansion card is installed. - 3 x PCI Express x1 slots (The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.) - 1 x PCI slot Multi-Graphics Technology - Support for 2-Way AMD CrossFireX/NVIDIA SLI technology (PCIEX16 and PCIEX8) - The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX/NVIDIA SLI is enabled. Storage Interface Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. Marvell 88SE9172 chip: - 2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed. - Up to 6 USB 2.0/1.1 ports (available through the internal USB headers) VIA VL800 chip: - Up to 4 USB 3.0/2.0 ports on the back panel * Due to a Windows 7 limitation, please connect your USB device(s) to the Intel controlled USB port(s) (located below the RJ-45 LAN port) before the VIA USB 3.0 controller driver is installed. Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 8-pin ATX 12V power connector - 1 x PCIe power connector - 2 x SATA 6Gb/s connectors - 4 x SATA 3Gb/s connectors - 1 x mSATA connector - 1 x CPU fan header - 4 x fan headers - 1 x front panel header - 1 x front panel audio header - 1 x S/PDIF Out header - 3 x USB 2.0/1.1 headers - 1 x USB 3.0/2.0 header - 1 x Clear CMOS jumper - 1 x Trusted Platform Module (TPM) header - 1 x power button - 1 x reset button - 1 x Clear CMOS button - 1 x Voltage Measurement Points - 1 x BIOS Switch Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x D-Sub port - 1 x DVI-D port - 1 x optical S/PDIF Out connector - 1 x HDMI port - 1 x DisplayPort - 2 x eSATA 6Gb/s connectors - 6 x USB 3.0/2.0 ports - 1 x RJ-45 port - 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Install - Support for Xpress Recovery2 - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. - Support for eXtreme Hard Drive (X.H.D) - Support for Auto Green - Support for ON/OFF Charge - Support for Q-Share - Support for 3D Power - Support for LAN Optimizer (Intelligent optimization network management tool) Bundle Software - Norton Internet Security (OEM version) - Intel Rapid Start Technology - Intel Smart Connect Technology - Intel Smart Response Technology - LucidLogix Virtu MVP * Make sure the monitor cable has been connected to the integrated graphics port on the back panel. Operating System - Support for Microsoft Windows 7/XP Form Factor - ATX Form Factor; 30.5cm x 24.4cm Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Скачать