CPU - Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package - L3 cache varies with CPU Chipset - Intel H61 Express Chipset Memory - 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. - Dual channel memory architecture - Support for DDR3 1333/1066/800 MHz memory modules - Support for non-ECC memory modules Onboard Graphics Integrated Graphics Processor: - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. Audio - Realtek ALC887 audio codec - High Definition Audio - 2/4/5.1/7.1-channel * To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN - 1 x Realtek 8111E chip (10/100/1000 Mbit) Expansion Slots - 1 x PCI Express x16 slot, running at x16 The PCI Express x16 slot conforms to PCI Express 3.0 standard.) * To support PCI Express 3.0, you must install an Intel 22nm CPU. - 3 x PCI Express x1 slots The PCI Express x1 slots conform to PCI Express 2.0 standard.) Storage Interface Chipset: - 4 x SATA 3Gb/s connectors (SATA2 0/1/2/3) supporting up to 4 SATA 3Gb/s devices Marvell 88SE9172 chip: - 2 x SATA 6Gb/s connectors (GSATA3 0/1) supporting up to 2 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) Etron EJ168 chip: - Up to 2 USB 3.0/2.0 ports on the back panel Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 4-pin ATX 12V power connector - 4 x SATA 3Gb/s connectors - 2 x SATA 6Gb/s connectors - 1 x CPU fan header - 1 x system fan header - 1 x front panel header - 1 x front panel audio header - 2 x USB 2.0/1.1 headers - 1 x Clear CMOS jumper Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x D-Sub port - 1 x DVI-D port - 4 x USB 2.0/1.1 ports - 2 x USB 3.0/2.0 ports - 1 x RJ-45 port - 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller - iTE IT8728 chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 32 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Bundle Software - Norton Internet Security (OEM version) Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Recovery2 - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. - Support for ON/OFF Charge Form Factor - Micro ATX Form Factor; 24.4cm x 17.4cm Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Скачать