Скачать драйвер для Yamaha MTX Editor Utility 1.1.1/EXi8/EXo8 Firmware 1.11 for Windows 7/Windows 8

MTX Editor 1.1.1:

New Features:
- Now supports the following devices: MTX5-D / XMV4280-D / XMV4140-D / XMV8280 / XMV8140 / XMV8280-D / XMV8140-D / EXi8 / EXo8 / DCP4S-US/EU / DCP4V4S-US/EU
- Setup of Dante devices (MTX5-D & XMV-D) can now be configured from MTX Editor.
- A maximum of four MTX systems can be set up and controlled in one project file.
- Preset Links can be created for preset recall across MTX systems within the same project file.
- Added the "XMV" screen and "EXo8" screen, which provides display and setup for the parameters of XMV and EXo8.
- Added the following functions on the Project screen: “Set up for the XMV DIMMER function” & “Display of the XMV [OUTPUT SETUP]”
- You can switch the meter point of the input channel between EQ OUT and POST ON (default).
- When a Preset is recalled, you can set the Scheduler function to be disabled in the "Preset" dialog box.
- Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box.
- By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select.
- Added the function of word clock setup.
- Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc.
- Added VXC series and VXS series to the library for the SPEAKER PROCESSOR.

Improvements:
- Improved the functions of SD Song Select & Play.
- The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86).

Fixed Bugs:
- Solved a problem when settings are taken into MTX Editor using the "Go Online From Devices" dialog box from the MTX system (of two or more MTX units) in the state where GPI Out is set up in the "Scheduler" dialog, the GPI Out settings of the second and subsequent MTX3 units will be incorrectly displayed.
- Solved a problem while playing back music and sound files which have been saved to an SD memory card, and SD PLAY recalled a preset having a "No Assign" setting or an event was called up having a SONG setting of "No Assign," the SD card playback was stopped rather than continuing unaffected.

EXi8/EXo8 Firmware V1.11:

Fixed Bugs:
- Solved a problem when the EXi8/EXo8 is started two or more times in succession, with DIP switches 7 and 8 set to "INITIALIZE," alert numbers 2 and 7 will display.

Known issues:
- The EXi8/EXo8 may not be restarted automatically after running the Firmware Update. If the device is not restarted when “Complete” is displayed in the Status column, please turn the device off and then on again.


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.