Скачать драйвер для TRENDnet TEW-800MB Wireless Media Bridge Firmware 1.0.1.0

Installation notes:
1. Save the downloaded firmware file to your PC
2. Right click on the downloaded file and select Extract All or Extract Here option
a. Make sure to remember the location where the extracted file will be saved.
3. Open your web browser and enter http://tew-800mb/ or http://192.168.10.110 into the address bar (default settings).
4. You will be prompted for username and password (“admin” is the default username and check the default password on the label on the bottom panel, or enter the password you changed from the default password).
5. Navigate to the Administrator section and select Upload Firmware option
6. Click Browse and select firmware file (.bin) in the extracted file and the click Apply button to load
7. Wait until the firmware upload completed and the device reboots.
8. The firmware upgrade is completed.


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.