Программы для ВконтактеNetgear FVX538v1 Firmware 1.6.29
- Размер: 7 MB
- ОС: Win All
- Имя файла: fvx538_v1629.zip
This note describes enhancements and bug fixes in the FVX538 Release Version 1.6.29 software. The enhancements and fixes are those added since Release Version 1.6.5.
New Feature
IKE Mode Config Mode Config allows a remote VPN client to obtain a virtual IP address and other IP configuration information (DNS, WINS, etc) from the router.
Modifications and Bug Fixes
Version 1.6.29
1. Fixed VPN interoperability issues.
2. Fixed conflicts between mode config and regular client configurations.
3. Updated mode config help screen.
4. Fixed certificate upload problems.
5. PPPoE stability problems are fixed.
6. Can now add custom services up to 125 total services.
7. Increased the total number of possible rules to 600.
8. SMTP login name can now accept up to 50 characters.
Version 1.6.23
1. Fixed: Can't configure inbound policy with classical routing.
2. VPN wizard modified to address FQDN issues.
3. Fixed: FVS338 image can be loaded by mistake.
4. Fixed: GUI can't be accessed over VPN tunnel.
5. Fixed: VPN status drop button not function.
6. Fixed: Disabling VPN policy will not drop tunnel.
7. Fixed: Can't access GUI if "Any" is used for VPN policy Remote IP.
8. Fixed: Can't edit Protocol binding.
9. Fixed: PPPoE default MTU value.
10. Fixed: Enable WAN Ping checkbox for DMZ-WAN rules menu.
11. Erasing to factory defaults now automatically triggers a reboot.
Version 1.6.15
1. IKE policy can now be configured if WAN is down.
2. Periodic crashes fixed.
3. Guest (read-only) default password changed to password.
Version 1.6.12
1. VPN throughput increased.
2. Number of simultaneous sessions increased.
3. Guest (read-only) password can now be changed separately (default is guest).
4. Default gateway is now shown in routing table.
5. Fixed: When WAN2 is primary and in PPPoE mode, VPN tunnel can't pass traffic.
6. Fixed: VPN traffic stops when heavy traffic.
7. Removed One-to-one NAT table and Exposed Host, since these functions can be performed with Inbound Rule.
Known Issues
1. Can't edit VPN policy to change LAN subnet.
2. An attempt to access a blocked site is not logged.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.
New Feature
IKE Mode Config Mode Config allows a remote VPN client to obtain a virtual IP address and other IP configuration information (DNS, WINS, etc) from the router.
Modifications and Bug Fixes
Version 1.6.29
1. Fixed VPN interoperability issues.
2. Fixed conflicts between mode config and regular client configurations.
3. Updated mode config help screen.
4. Fixed certificate upload problems.
5. PPPoE stability problems are fixed.
6. Can now add custom services up to 125 total services.
7. Increased the total number of possible rules to 600.
8. SMTP login name can now accept up to 50 characters.
Version 1.6.23
1. Fixed: Can't configure inbound policy with classical routing.
2. VPN wizard modified to address FQDN issues.
3. Fixed: FVS338 image can be loaded by mistake.
4. Fixed: GUI can't be accessed over VPN tunnel.
5. Fixed: VPN status drop button not function.
6. Fixed: Disabling VPN policy will not drop tunnel.
7. Fixed: Can't access GUI if "Any" is used for VPN policy Remote IP.
8. Fixed: Can't edit Protocol binding.
9. Fixed: PPPoE default MTU value.
10. Fixed: Enable WAN Ping checkbox for DMZ-WAN rules menu.
11. Erasing to factory defaults now automatically triggers a reboot.
Version 1.6.15
1. IKE policy can now be configured if WAN is down.
2. Periodic crashes fixed.
3. Guest (read-only) default password changed to password.
Version 1.6.12
1. VPN throughput increased.
2. Number of simultaneous sessions increased.
3. Guest (read-only) password can now be changed separately (default is guest).
4. Default gateway is now shown in routing table.
5. Fixed: When WAN2 is primary and in PPPoE mode, VPN tunnel can't pass traffic.
6. Fixed: VPN traffic stops when heavy traffic.
7. Removed One-to-one NAT table and Exposed Host, since these functions can be performed with Inbound Rule.
Known Issues
1. Can't edit VPN policy to change LAN subnet.
2. An attempt to access a blocked site is not logged.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.
Идёт загрузка...