Скачать драйвер для NETGEAR R6200 WiFi Router Firmware 1.0.0.28

Fixes:
- Removed Access Control function.
- [Access control]The "Access control" can't work normally (by removing this function).
- [GUI] channel (2.4G and 5G) display error in router status page when disable wireless radio.
- 2.4G wireless network with security mode as TKIP, AES and Mixed mode is disabled when enabling its 5G repeating function.
- Router can be set to be repeater with invalid IP address when it is enabled 5G wireless repeating function.

Important Note:
- Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.
- The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
- Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.