Скачать драйвер для Dlink DSN-2100-10 Firmware 200119

Fixes:

- New GUI - Graphical User Interface
- Simplified Target Node Creation

Description:

Drive Bays•8
Drive Interface Support•SATA-II support
System Memory•256MB to 512MB (512MB standard)
Cache Memory•256MB to 4GB (512MB standard)
Battery Backup for Cache•Standard (approximately 72 hours on full charge)
Bandwidth•Up to 425MB/s
Storage Capacity•8TB capacity with 1TB hard drives (supports for higher capacity drives as they are introduced)
Operating Systems Supported•Windows® Vista® 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI initiator•Windows Server 2003® 32-bit & x64 SP1 (Standard & Enterprise) with v2.04 iSCSI initiator•Windows Server 2003 R2 32-bit & x64 (Standard & Enterprise) with v2.04 iSCSI initiator•Windows XP Pro 32-bit & x64 with v2.04 iSCSI initiator•Windows 2000 Advanced Server with v1.6 & v2.01 iSCSI initiator•Fedora® Core® 6 & 7•Red Hat® 7.3•Red Hat 9•Red Hat Enterprise® WS 3 update 4•Red Hat Enterprise ES 4 update 4 & 5 32-bit & x64•Red Hat Enterprise AS update 4•SuSE® Professional 9.3 32-bit & x64•OS® X (10.4.7 | 10.4.8 | 10.4.10)with Intel® and Power PC CPUs

Supported NICs, iSCSI Accelerators and iSCSI HBAs•Intel® Pro 1000MT & XT [1GbE]•Intel Pro 10000 CX4 [10GbE]•Chelsio® S210X-SR-XFP (S2iO) [10GbE]•Neterion® Xframe® II & Xframe E [10GbE]•Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)•Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)•QLogic® 4010C•QLogic 4052C

iSCSI Network InterfaceiSCSI Network Interface•Four (4) 1GbE Copper Ports
Host Interface•iSCSI Draft 20 compliant initiator
Connections•1,024 hosts
CHAP Authentication•Yes
Access Control of Management•Yes
iSCSI/TCP/IP Full HW Offload•Yes
Jumbo Frames Support•Yes
LAG Support (Link Aggregation)•Yes – Up to four (4) LAGs (IEEE802.3ad Link Aggregation Group)
VLAN Support•Up to eight (8). 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN (IEEE802.1Q Tag)
Volume & RAID SupportRAID Controller•Single- Integrated in ASIC
RAID Support•RAID Levels 0, 1, 1+0 and 5
Volumes•1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes•1,024
Online Capacity Expansion•Yes
Hot Swappable Drives•Yes
Instant Volume Access•Yes
Free Space Defragmentation•Yes
Auto-Detection Failed Drive•Yes
Auto-Rebuild Spare Drive•Yes
RAID Level Migration•Yes
Drive Roaming in Power Off
(configured drives are not bay-specific)•Yes
Micro Rebuilds•Yes
Storage ManagementEmbedded IP-Based Management GUI•Create, manage, expand and monitor storage pool, volumes and RAID•Event manager to view and persist events
Firmware Field Upgradeable•Yes
SMI-S Version 1.1•Yes
PowerSupply Type•Redundant 2U 400 Watt
Input Voltage•100-240 VAC
Input Frequency•47-63 HzI
nput Current•8A Maximum at 100VAC and 4A Maximum at 240VAC
(maximum amps vs. voltage varies linearly throughout this voltage range)
Power Factor Correction•95%@110V, Full load
Power Consumption•360W (full configuration)
Thermal•1260 BTU / hour (full configuration)


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.