Скачать драйвер для Cisco WRVS4400Nv2 Router Firmware 2.0.2.1

The following updates were made in firmware version 2.0.2.1:
- Updated the text of the Note field on the Wireless > WDS window.
- Added a logout link to the Home page.
- Updated the Firewall > Internet Access Policy window so that when a user adds an allow-rule policy, the user can only add allow rules to the policy, but not deny rules.
- Updated the Internet access policy so that it supports overnight scheduling.

The following problems were fixed in firmware version 2.0.2.1:
- The DHCPv6 section of the Setup > LAN section does not reflect the correct DHCPv6 starting and ending IP pool addresses.
- If the PPPoE username or password include special characters, the PPPoE connection fails.
- The Firewall > Internet Access Policy window displays the wrong message when you change Deny to Allow.
- Internet filtering does not work if GET and HOST are split.
- Messages prompting the user for acknowledgment display a YES button instead of an OK button.
- No example of a forbidden domain construct in the GUI.
- The Approved URLs list displays an incorrect example of the syntax of a URL.
- Typo in the error message that is displayed when entering an IP addresses that is already in the Approved Clients list.
- No validation for the IP address ranges in the Approved Clients list.
- There is an issue in the process of generating random certificates.
- In the L2 Switch > VLAN window, highlighting all VLANs (2–4) and deleting VLAN ranges is misleading because some of the selected items remain in the list.
- Rebooting the router causes clients on non-default VLANs to lose their IP addresses and acquire IP addresses from the default VLAN (1).
- The broadcast IP address should not be allowed as the Gateway address when adding route.
- Incorrect error message displayed when adding a duplicate static route.
- Daylight savings time is incorrect for Time Zone GMT -6 (Central Time US and Canada).
- User cannot use the WAN IP address to locally access the GUI using HTTPS.
- SMTP update is needed so that the user can enter the port number.
- HTML tags are displayed when the Disconnect button is clicked on the Summary window.
- Fixed several web interface vulnerabilities that could be exploited by a remote, unauthenticated user. For more information, see the following Cisco Security Advisory:


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Примечание: Ссылка "скачать" может вести как непосредственно на файл, так и на сайт производителя, на котором Вы можете найти нужный файл.
Это связано с тем, что некоторые производители не позволяют размещать прямые ссылки на файлы.